Eldes EKB3 Installation Manual download pdf (Page 36)

36 EN

MANUAL ELDES ESIM264 V3.1

11. iBUTTON KEYS

An iButton key is a unique 64-bit ID code containing chip enclosed in a stainless steel tab usually implemented in a small plastic holder.

ESIM264 system supports up to 5 iButton keys each holding a unique identity code (ID), which is used for system arming and disarming.

11.1. Adding and Removing iButton Keys

To add an iButton key to the system, do the following:

a) Disarm the system in all partitions (see 12. ARMING AND DISARMING).

b) Enable Allow Adding New iButton Keys mode.

c) T ouch the key to the iButton key reader when the system is disarmed (see picture below).

d) The successfully added iButton key will be indicated by short beeps emitted by the system’s buzzer.

e) Add as many iButton keys as necessary – touch one key after another to the reader – until the number of 5 keys is reached.

NOTE: iButton Key 1 can be added without Allow Adding New iButton Keys mode being enabled.

Enable Allow Adding

New iButton Keys

mode

SMS

SMS text message content:

ssss_IBPROG:ON

Value: ssss – 4-digit SMS password.

Example: 1111_IBPROG:ON

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → IBUTTON KEYS → OK → NEW IBUTTON →

OK → ENABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 18 & parameter status value:

18 0 #

Example: 180#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

When adding of iButton keys is complete, please disable Allow Adding New iButton Keys mode.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 167 168

No comments

Eldes EKB3 Installation Manual Page 36