Eldes EKB3 Installation Manual download pdf (Page 46)

46 EN

MANUAL ELDES ESIM264 V3.1

13. EXIT AND ENTRY DELAY

When arming, the system initiates the exit delay countdown (by default – 15 seconds) intended for the user to leave the secured area. The

exit delay is indicated by short beeps emitted by EKB2/EKB3 keypad buzzer and buzzer, connected to the alarm system. in addition, when

arming by EKB2 keypad, icon will be displayed next to the countdown timer on keypad screen during exit delay.

• a non-partitioned system, icon will be displayed next to the countdown timer on EKB2 keypad screen during exit delay.

• a partitioned system, EKB2 keypad will display ARMING part-name message on the screen for 3 seconds and switch to partition

selection menu during exit delay.

Exit delay is provided when arming the system by the following methods:

• EKB2/EKB3 keypad and user password.

• iButton key.

• EWK1/EWK2 wireless keyfob.

• Arm/Disarm by Zone.

To arm the system without exit delay, use one of the following system arming methods:

• Free of charge phone call.

• SMS text message.

• EGR100 middle-ware.

Set exit delay

SMS

SMS text message content:

ssss_EXITDELAY:ext

Value: ssss – 4-digit SMS password; ext – exit delay duration, range – [0... 600] seconds.

Example: 1111_EXITDELAY:20

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → EXIT DELAY → OK

→ ext → OK

Value: aaaa – 4-digit administrator password;, ext – exit delay duration, range – [0... 600]

seconds.

EKB3

Enter parameter 72 & exit delay duration:

72 ext #

Value: ext – exit delay duration, range – [0... 600] seconds.

Example: 72259#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

NOTE: Alternatively, you can set exit delay value to 0 in order to arm the system without exit delay by any available method.

Once the exit delay has expired, the system initiates the entry delay countdown (by default – 15 seconds) if a Delay type zone is violated.

The countdown is indicated by short beeps emitted by keypad buzzer and by steady beep emitted by system’s buzzer. The indication is in-

tended to advise the user that the system should be disarmed. Once the user presses/touches any key on the keypad during this delay, the

buzzer of the keypad will be silenced. If the system is disarmed before the entry delay expires, no alarm will be caused.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 167 168

Comments to this Manuals

No comments

Eldes EKB3 Installation Manual Page 46

Comments to this Manuals

Related products and manuals for Security access control systems Eldes EKB3