Eldes ESIM251 User Manual download pdf (Page 16)

FOR ADVANCED USERS

All these features can be congured using program “ELDES Conguration Tool“

E. g. 1

TheuserwantstoconnectESIM251systemtoanexistingalarminabuildingwhereenterpriseAandandenterpriseBwork.Both

enterprisesusethesamealarmsystemthathastwozones.Thealarmsystemhas5programmableoutputs(PGM).

Task NO3:

 ConguringthesystemsothattheintrusiontoenterpriseApremisesisreportedtothejanitor(NO3)andenterpriseAemployee

(NO4)bySMSmessagesandcalls.EnterpriseAemployee(NO4)wantstoreceiveacallonlyinthecaseifthejanitor(NO3)doesnot

answerthecall,isoutofnetworkcoverageoratthattimethejanitor’stelephonelineisengaged.

As per factory default settings SMS message sending feature in the case of alarm is enabled for all users until the rst successful

deliveryoftheSMSmessage,itisnecessarytoenablemandatorySMSmessagedelivery(seemoreinchapter3.7)andtoremove

the users who should not receive alarm messages. Besides, as per factory default settings, calling feature in the case of alarm is also

enabledforallusersthereforecallfunctionmustbedisabledforallusersexceptusersNO3andNO4.Asperfactorydefaultsettings

in the case of alarm the system rings until the rst answered call, therefore in this case nothing should be congured.

a)FirstofallsecuritycentralunitmustbeprogrammedinthewaysothatwhensecuritysensorsofenterpriseAaretriggered

the signal is transmitted to security central unit output PGM4.

b)PGM4isconnectedtoESIM251inputZ4

c) ThefollowingcongurationSMSmessagesmustbesenttoESIM251system:

where SMSALL enables mandatory SMS message delivery feature for all users.

Where SC125 means that alarm SMS message delivery feature is disabled for users NO1, NO2 and NO5 after Z4 zone is triggered.

CC125 means that alarm calls are disabled for users NO1, NO2 and NO5 after Z4 zone is triggered.

XXXX_SMSALL:ON

XXXX_SMSEXTRA:Z4:SC125,CC125

Alarm

SMS/Calls

Alarm

SMS/Calls

PGM4

Enterprise A Enterprise B

ESIM151

PIR

Director A

NO1

Director B

NO2

Worker A

NO4

Worker B

NO5

Janitor

NO3

Janitor

Alarm system

GATES

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments

Eldes ESIM251 User Manual Page 16

Comments to this Manuals