USER MANUAL ELDES ESIM251 V1.0 29
FOR ADVANCED USERS
All these features can be congured using program “ELDES Conguration Tool“
Value (CnVal) – table of values
Cn – command
name (2 letters)
Val – possible
command
meaning.
Command description
Initial factory
default values
Comments
Enabling/
disabling
conrmation call
(CallBack)
CB 1
Conrmation call mode
is enabled for all users.
CB1 means that when users control the
output via SMS message they are notied
about a successful output status change
by a conrmation call.
CB 0
Conrmation call mode
is disabled for all users.
CB0
Disabled for all
users NO1-NO5.
CB0 means that when users control
the output via SMS message they will
not receive a call informing about a
successful output status change.
Conrmation call
duration
CT
1; s
All users receive
conrmation call when
the output is enabled;
s- call time in seconds
СT12
The rst digit is a command; the last digit
refers to call time in seconds. E. g. СT12
means that if conrmation call mode is
enabled the call will be forwarded to the
user who is trying to turn on the relay.
The system will call for 2 seconds.
0; s
All users receive
conrmation call when
the output is disabled;
s- call time in seconds
СT08
The rst digit is a command; the last digit
refers to call time in seconds. E. g. СT08
means that if conrmation call mode is
enabled the call will be forwarded to the
user who is trying to turn o the relay.
The system will call for 8 seconds.
Enabling/
disabling
conrmation
SMS message
(SMSconrm)
SB 1
Conrmation SMS
mode is enabled for
all users.
SB1
Enabled for all
users NO1-NO5.
SB1 means that when all users control
the output via SMS message they will
be informed about a successful output
status change by a conrmation SMS
message.
SB 0
Conrmation SMS
mode is disbled for all
users.
SB0 means that when all users control
the output via SMS message they will not
be informed about a successful output
status change by SMS message.
Example of SMS message conguring C1 output ways of information:
This message congures C1 output parameters when controlled via SMS messages.
CB1 means that when the user enables/disables output С1 he/she receives ashort conrmation call CALLBACK.
CT13 means that when the relay is enabled conrmation call duration is 3 seconds.
CT06 means that when the relay is disabled conrmation call duration is 6 seconds.
SB1 means that conrmation message is sent informaing about enabling/disabling.
To see the preset values for any command send SMS message with the same format that you use when changing parameters; only
Value structure will have no value:
XXXX–userpassword.ValuestructureisCnVal,whenCniscommandname(2letters).
E. g. XXXX_SMSEXTRA:OCS:CB,CT,SB
XXXX_SMSEXTRA:OCS:CB1,CT13,CT06,SB1
XXXX_SMSEXTRA:OCS:Value1,Value2,……,ValueN
Comments to this Manuals