Eldes ESIM251 User Manual download pdf (Page 22)

FOR ADVANCED USERS

All these features can be congured using program “ELDES Conguration Tool“

E. g. 4.

The company taking care of automatic systems needs to have information about critical breakdowns of mechanisms and has to

quicklyreactandeliminatethebreakdown.Therearethreemembersofoperatingpersonnel(NO1),(NO2)and(NO3).

As per factory default settings SMS message sending feature in the case of alarm is enabled for all users until the rst successful

delivery of the SMS message, it is necessary to remove users NO2 and NO3 and disable alarm calls for all users. It is also necessary to

invert ESIM251 input from NO to NC mode so that alarm is given only when the signal disappears.

a)FirstofallasignalindicatinggasboilerbreakdownisconnectedtoESIM251inputZ1.

b) ThefollowingcongurationSMSmessagemustbesenttoESIM251system:

where SC23 means that alarm SMS message sending is disabled for users NO2, NO3 after Z1 zone is activated.

CC123 means that alarm calls are disabled for users NO1, NO2 and NO3 after Z1 zone is activated.

We make an assumption that users NO4-NO5 were not entered to the system at all. LI1 means that NC -

“normally closed” - mode is enabled for the input.

Task No1:

 Conguringthesystemsothatoperatingpersonnelmember(NO1)receivesSMSmessageaboutthebreakdownofgasboiler.

Working normally a gas boiler transfers a signal, and when it breaks down the signal is not transmitted.

XXXX_SMSEXTRA:Z1:SC23,CC123,LI1

Worker

NO1

Worker

NO2

Worker

NO3

Pump

Gas boiler

ESIM151

Automatic

system

Alarm

SMS

Fault

signal

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Eldes ESIM251 User Manual Page 22