Eldes ESIM251 User Manual download pdf (Page 13)

USER MANUAL ELDES ESIM251 V1.0 13

To enable this function send the following SMS message:

To disable this function send the following SMS message:

If you want to congure SMS message delivery only for particular users or only for particular zones, refer to chapter 3.9 or use con-

guration program.

3.8 Calling all users

During the alarm, ESIM251 system starts calling NR1. If the call to NR1 was unsuccessful or the subscriber was out of network

coverage the call is forwarded to NR2 etc. If the user rejected the call or answered te call during the alarm the system stops calling.

However, you can set the system to call all recorded users regardless of the fact whether the user answered or rejected the call, was

out of network coverage or was engaged.

To turn on this feature send the following SMS message:

ATTENTION!

Whenthisfeatureisenableditwillnotbepossibletostopcallingthenextuserinthesequenceevenifthecallisanswered.

To disable this function send the following SMS message:

If you want to congure calling only to particular users or only for particular zones, refer to chapter 3.9 or use conguration program.

3.9 Conguration for advanced users

All features described in chapter 3.9 of the user manual can be congured using “ELDES Conguration Tool“ software.

But if there is no possibility of connecting the computer or if you want to change the settings remotely you can do this via SMS

messages. We use changinf these settings by SMS message only for advanced users.

XXXX_SMSALL:ON

XXXX_SMSALL:OFF

XXXX_CALLALL:ON

XXXX_CALLALL:OFF

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Eldes ESIM251 User Manual Page 13