Eldes ESIM251 User Manual download pdf (Page 24)

E. g. 4.

The company taking care of automatic systems needs to have information about critical breakdowns of mechanisms and has to

quicklyreactandeliminatethebreakdown.Therearethreemembersofoperatingpersonnel(NO1),(NO2)and(NO3).

As per factory default settings C1 output control via calls is disabled for all users, it is necessary to enable this feature and to set

the users who will be able to control the output. Besides, it is also necessary to set relay status for every user when he/she calls the

system. In this case the relay must be activated and the activation duration must be 2 seconds; after this the relay returns to the

previous status.

a)FirstofallESIM251systemrelayoutputhastobeconnectedtotheconnectorsofautomaticcontrolunit.

b) ThefollowingcongurationSMSmessagemustbesenttoESIM251system:

where CE123 means that C1 relay control via call is enabled for users NO1-NO3.

MS10 means that the relay is activated when user NO1 calls the system.

MS20 means that the relay is activated when user NO2 calls the system.

MS30 means that the relay is activated when user NO3 calls the system.

MS1T0.0.2 means that relay status is changed for 2 seconds when user NO1 calls the system.

MS2T0.0.2 means that relay status is changed for 2 seconds when user NO2 calls the system.

MS3T0.0.2 means that relay status is changed for 2 seconds when user NO3 calls the system.

Task No3:

 Conguringthesystemsothatoperatingpersonnelmembers(NO1),(NO2)and(NO3)canrebootthe“hanged”automaticcontrol

system without going to the object but via a short call to ESIM251 system.

Worker

NO1

Worker

NO2

Worker

NO3

Pump

Gas boiler

ESIM151

Automatic

system

Control

Calls

XXXX_SMSEXTRA:COC:CE123,MS10,MS20,MS30,MS1T0.0.2,MS2T0.0.2,MS3T0.0.2

FOR ADVANCED USERS

All these features can be congured using program “ELDES Conguration Tool“

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

No comments

Eldes ESIM251 User Manual Page 24